In stock
SKU
118307

Atacama Atabites SMD 7.5kg Stand Filler

£29.99

Featuring new zinc coated steel micro-discs, the Atabite SMD-Z 7HD inert filler has a uniformed range of particulate sizes giving consistent sonic performance. Delivery 2-3 Days

In order to get the best possible sound from your speaker stands, it is recommended that the main vertical columns are partially filled with a high density inert filler .

By using Atabites you will reduce ringing and give a sonically dead platform from which to position bookshelf style speakers.

Featuring new zinc coated steel micro-discs, the Atabite SMD-Z 7HD inert filler has a uniformed range of particulate sizes giving consistent sonic performance. The Zinc coating adds mass, protects the filler from both oxidisation and degradation while enhancing the visual aesthetics.

PLEASE NOTE- Atabites are supplied by weight, not volume. (7 KG tubs). Some settling of contents may occur in transit.

As a guide, each 1.8L tub contains approximately 1,6L of Atabites. As a comparison, 1.6L of typical dry *beach sand would weigh less than 2.5KG.

 

Maximum approximate weight of Atabites that can be used for each pair of Atacama speaker stands:-

  • Nexus 5,  Moseco 5, =7KG,                        
  • Nexus 6,  Moseco 6, Duo 6, =10.4KG            
  • Nexus 7,  Moseco 7, Duo 7, =12.2KG
  • Nexus10, Moseco 10, =21KG

Moseco CC series, as above with corresponding leg height.

  • SLX200=7.2KG
  • Audition/ SLX300=15.2KG
  • Audition/ SLX400=24KG
  • Audition/ SLX500=32.8KG
  • Audition/ SLX600=41.6KG
  • Audition/ SLX700=48.8KG
  • SLX1000=68KG (SL series, as SLX)
  • HMS1.1 & Moseco XL 500mm=34KG
  • HMS1.1 & Moseco XL 600mm=41.8KG
  • HMS1.1 700mm=55.4KG
  • HMS2.1 & HMS2X-600=84KG
  • Apollo Cyclone 5= 7KG
  • Apollo Cyclone 6= 10.4KG
  • Apollo Cyclone 7= 12.2KG
  • Moseco 5=7KG
  • Moseco 6, Duo 6=10.4KG
  • Moseco 7, Duo 7=12.2KG
  • Moseco 10=21KG
  • Nexus 6i=8.2KG
  • Nexus7i=12.2KG
  • Nexus10i=21KG

 

Sonic results will depend on speaker stand positioning, type of speaker, room size, type of electronics and cabling, listening position and personal taste. However, as a general rule filling the stands approximately half to two thirds full generally gives the best results.

NOT suitable for Aurora 6 Speaker stands.

Filler can be used with non-Atacama/Apollo speaker stands but check suitability first with the stand manufacturer.

Beach Sand Comparison:

Atabite SMD-HD 1 litre (L) of volume = 4.18 kilograms (kg - kilo) in weight

Beach Sand 1 litre (L) of volume = 1.53 kilograms (kg - kilo) in weight

More Information
gtin (EAN or UPC) 5060151299710
Guarantee (mths) 12
Featured No
Write Your Own Review
You're reviewing:Atacama Atabites SMD 7.5kg Stand Filler
Your Rating

   Frequently Asked Questions and Answers


To Top