In stock
SKU
80161

Ortofon Cartridge Leads Basic (Set of 4)

£10.00

Ortofon Cartridge Leads Basic (Set of 4).

Please allow 5-10 Days GB Mainland Delivery on this item

 

Set of Cartridge wires for connecting turntable headshells to phono cartridges.

  • Universal fit, suitable for any brand cartridge & turntable with detachable wires.
  • Colour coded for ease of setup

 

Essential Information

  • This item is supplied with a 1 year warranty
  • Please allow 5-10 Days GB Mainland Delivery on this item
More Information
Guarantee (months) 12
Write Your Own Review
You're reviewing:Ortofon Cartridge Leads Basic (Set of 4)
Your Rating

   Frequently Asked Questions and Answers


  • Can modern record players play 78rpm records?

    Unless it explicitly states in the product specifications most turntables do not play 78rpm records. Some manufacturers offer modification kits but what is needed varies from model to model. Contact us with your turntable model number for personalised advice.

  • Why is my stylus listed under a different brand name to my system?

    Most HiFi & turntable brands do not manufacture their own styli & buy them in from other specialised brands. Because of this is it not always possible to identify your stylus from the brand name of the turntable .

  • What is the difference between moving magnet (MM) and moving coil (MC) turntable cartridges?

    In a Moving Magnet cartridge, the canteleiver (the arm) has 2 magnets attached inside the stylus body, 1 for the left channel & 1 for the right channel. These move according to the groove of the record & induce an electrical signal into the coils inside the cartridge body. This signal is then amplified by a phono pre-amp, either built into you amplifier or an external unit, to reach audible levels. In a Moving Magnet cartridge it is possible to replace the stylus once the original has worn. Most manufacturers will make a selection of styli of differing grades to fit the same cartridge. A Moving Coil cartridge is manufactured in opposite arrangement to Moving Magnet. The coils are attached to the canteleiver while the magnets are fitted inside the cartridge. It is generally accepted that Moving Coil cartridges are superior in sound quality to Moving Magnet cartridges, the compromise is that Moving Coil cartridges are significantly more expensive than Moving Magnet cartridges, & also that it is not possible to replace the stylus once worn, necessitating the purchase of a complete new cartridge.

  • Can the stylus be replaced on all cartridges?

    No. Styli can usually be replaced on Moving Magnet (MM) type cartridges but it is not possible to change the stylus on Moving Coil (MC) Cartridges

  • Can I fit an alternative cartridge if my stylus is no longer available?

    In most cases your turntable will have a 1/2" headshell mount, this can be identified by two small bolts running through your headshell to the cartridge. This is by far the most common type of connection with most new cartridges conforming to this standard. Other not so common but replaceable connections are a bayonet fitting, where the cartridge plugs directly into your tonearm via a bayonet, & a P4 connection, where your cartidge plugs directly into your tonearm by four pins. Fittings that are not replaceable include slide connectors such as those used by Dual & single screw connections, as used on very old turntables.

To Top