In stock
SKU
ROT-A14mk2B

Rotel A14mkII 2x80w Amplifier Black

Special Price £849.00 Regular Price £1,299.00

2x80w amplifier with analog , digital, PC-USB with MQA, wireless aptXTM and AAC Bluetooth and Moving Magnet Phono stage.

Please allow 5-10 Days GB Mainland Delivery on this item

 

The A14 MKII Integrated Amplifier delivers 80 Watts per channel of Class AB amplification from your favorite sources including analog, digital, PC-USB with MQA, wireless aptXTM and AAC Bluetooth and Moving Magnet Phono stage. Critically tuned power supply, DAC and amplifier circuits ensure the A14MKII will deliver countless hours of entertainment.

The A14MKII is the flagship model in the 14 Series family of Rotel products delivering 80 Watts of Class AB amplification into 8 ohm speakers powered by Rotel’s in-house manufactured, oversized toroidal transformer and an array of 4 high efficiency slit-foil bulk storage capacitors delivering an effortless acoustic performance.

A fully redesigned Digital to Analog circuit topology utilizes a Texas Instruments 32-bit/384kHz DAC with exhaustive tuning and hand selection of all critical components delivering a fuller, richer and more balanced presentation of the music. Improvements to the power supply and amplifier gain stages further refine the audio whether you are listening to a big band orchestra or a solo vocalist.

Tone controls provide treble and bass adjustments in 1dB steps up to +/- 10dB personalizing your experience for all music genres, moods and settings with a BYPASS mode eliminating unwanted noise and distortion.

The A14MKII supports your favorite sources including analog, digital, PC-USB with MQA, high-quality wireless aptX™ and AAC Bluetooth streaming and even a Moving Magnet Phono stage for vinyl fans.

The A14MKII is certified Roon Tested delivering the best experience using Roon software so you can just enjoy the music. Control system integration is available utilizing Ethernet, RS232, 12V-Trigger and remote IR connections.

Dual 5-way speaker binding posts allow Zone 2 installations with relay-controlled selection of the A-B speaker outputs. The front panel graphic display includes a large volume indication and audio stream information.

The A14MKII is comfortable in any setting delivering countless hours of audio entertainment.

 

Essential Information

  • This item is covered by a 2 year warranty
  • Please allow 5-10 Days GB Mainland Delivery on this item

More Information
Guarantee (months) 24
Specifications
    • Dimensions (W × H × D) - 430 × 93 × 345mm / 17" × 3.6" × 13.5"
    • Front Panel Height - 80mm (3.15")
    • Power Requirements - 230V, 50Hz
    • Power Consumption - 280W
    • Standby Power Consumption <0.5W
    • Net Weight - 8.94kg (19.71lbs.)
    • BTU Rating (4Ω, 1/8th power) - 632 BTU/h
    • Maximum Power Output - 150W/Ch (4Ω)
    • Continuous Power Output - 80W/Ch (8Ω)
    • Total Harmonic Distortion (THD) <0.018%
    • Frequency Response
      • Line Level Inputs: 10Hz - 100kHz, ±0.5dB
      • Digital Inputs: 10Hz - 90kHz, ±2.0dB, Max
      • Phono Input: 20Hz - 15kHz, ±0.5dB
    • S/N Ratio (IHF "A" Weighted)
      • Line Level Inputs: 100dB
      • Digital Inputs: 103dB
      • Phono Input: 90dB
    • Intermodulation Distortion (60Hz:7kHz, 4:1) <0.03%
    • Damping Factor 220
    • Input Sensitivity
      • Line Level Inputs: 230mV
      • Digital Inputs: 0dBfs
      • Phono Input (MM): 3.4mV
    • Input Impedance
      • Line Level Inputs: 24kΩ
      • Digital Inputs: 75Ω
      • Phono Input (MM): 47kΩ
    • Input Overload
      • Line Level Inputs: 4V
      • Phono Input: 50mV
    • Preout Level 1.2V
    • Output Impedance 470Ω
    • Tone Controls ±10dB at 100Hz / 10kHz
    • Coax/Optical Digital Input Signals SPDIF LPCM (Up to 24-bit/192kHz)
    • PC-USB
      • USB Audio Class 1 (up to 24-bit/96kHz)
      • USB Audio Class 2 (up to 32-bit/384kHz)
      • *Driver installation required
      • MQA and MQA Studio (up to 24-bit/384kHz )
      • Roon Tested
Write Your Own Review
You're reviewing:Rotel A14mkII 2x80w Amplifier Black
Your Rating

   Frequently Asked Questions and Answers


  • What is the difference between an Integrated Amplifier, Pre-Amplifier & Power Amplifier?

    An amplifier has 2 main internal sections. The switching & control section is called the Pre-Amplifier, this allows you to select your source & volume & sometimes allows tonal adjustment. The Power Amplifier then takes the signal from the Pre-Amplifier & amplifies it to power your speakers. An Integrated amplifier has both the Pre-Amplifier & Power Amplifier combined into a single box.

To Top