In stock
SKU
112351

Ortofon Stylus 540

£375.00

Replacement stylus, recommended for the following cartridge models: 540 Mkll, 540, 540 P - Contact us for a delivery ETA

Ortofon Stylus 540

Replacement stylus, recommended for the following cartridge models: 
540 Mkll, 540, 540 P

Please note, all cartridges within the 500 range have the same stylus-fitting, so they can all fit the Stylus 510, Stylus 520, Stylus 530 and Stylus 540. The Ortofon Alpha, as found on some Pro-Ject turntables, can be replaced or upgraded by any one of the 500 range as well.

In some production runs, the Ortofon 510 stylus has been produced with a black Ortofon logo on the front. The image shown is for illustrative purposes only.

Key Features:

 

  • Ultimate replacement and upgrade stylus for Ortofon 500 cartridge range
  • Superior and precise tracking ability 
  • Detailed audio reproduction on record playback
  • Nude FG70 stylus profile

 

 

 Essential Information:

  • This item is supplied with a 1 Year Warranty against manufacture defects
    • This warranty is subject to inspection and does not cover damage due to mis-use
  • Contact us for a delivery ETA for this item

More Information
gtin (EAN or UPC) 5705796150049
Guarantee (mths) 12
Specifications
  • Frequency Range:            20Hz - 27kHz
  • Frequency Response:     20Hz - 20kHz (+2/-3dB)
  • Tracking Ability at 315Hz:             Typically 90µm
  • Compliance, Dynamic, Lateral:    30µm
  • Stylus Type:        Nude FG70
  • Stylus Tip Radius r / R:    5 / 70µm
  • Equivalent Stylus Tip Mass:          0.3mg
  • Tracking Force Range:    1.25 - 1.75g (12.5 - 17.5mN)
  • Recommended Tracking Force: 1.5g (15mN)
  • Tracking Angle: 20º
  • Stylus Colour:     Black
Featured No
Write Your Own Review
You're reviewing:Ortofon Stylus 540
Your Rating

   Frequently Asked Questions and Answers


  • Can modern record players play 78rpm records?

    Unless it explicitly states in the product specifications most turntables do not play 78rpm records. Some manufacturers offer modification kits but what is needed varies from model to model. Contact us with your turntable model number for personalised advice.

  • Why is my stylus listed under a different brand name to my system?

    Most HiFi & turntable brands do not manufacture their own styli & buy them in from other specialised brands. Because of this is it not always possible to identify your stylus from the brand name of the turntable .

  • Can the stylus be replaced on all cartridges?

    No. Styli can usually be replaced on Moving Magnet (MM) type cartridges but it is not possible to change the stylus on Moving Coil (MC) Cartridges

  • Can I fit an alternative cartridge if my stylus is no longer available?

    In most cases your turntable will have a 1/2" headshell mount, this can be identified by two small bolts running through your headshell to the cartridge. This is by far the most common type of connection with most new cartridges conforming to this standard. Other not so common but replaceable connections are a bayonet fitting, where the cartridge plugs directly into your tonearm via a bayonet, & a P4 connection, where your cartidge plugs directly into your tonearm by four pins. Fittings that are not replaceable include slide connectors such as those used by Dual & single screw connections, as used on very old turntables.

To Top