Special order from supplier
SKU
81171

Project Acryl-IT Acrylic Platter for Debut / Xpression Turntables

£110.00

This platter upgrade, as found on the Debut Esprit turntable, creates an alternative aesthetic and sound from your turntable. The use of acrylic reduces tinny frequencies and helps accentuate the mid. GB Delivery 7-10 Days 

Upgrade your Debut or 1Xpression turntable to „Esprit“-standards. Acryl it is made from acrylic with satinised surface and brings a more liquid sound that leaves no space for platter resonances.  

The change is easily made: just exchange your metal platter for Acryl it. Unlike metal platters, where you will need to place a felt met between record and platter to damp metal resonance, you can put your record directly on the acrylic surface, with nothing in-between. Acryl it is able to improve overall performance significantly

 

 

Dimensions:

Platter Weight - 1.2kg
Platter Height - 20mm 
Platter Diameter - 300mm (12")

* Please note, this item is the Acrylic Platter only. The rest of the turntable (pictured) is not included

 

Essential Information:

  • This item is covered by a 2 Year warranty
  • Please allow 7-10 Days GB Delivery on this item
More Information
Guarantee (months) 24
Write Your Own Review
You're reviewing:Project Acryl-IT Acrylic Platter for Debut / Xpression Turntables
Your Rating

   Frequently Asked Questions and Answers


  • Why is my record playing at the wrong pitch?

    Pitch is controlled by the speed of the turntable so it's likely that you have this set wrong. Some turntable have a button for speed control, others require manually changing by moving the belt position on the pulley. You may need to lift the platter on some models to access the pulley wheels.

  • Where can I buy replacement Styli & Belts?

    We have a selection of styli, belts, spare parts & upgrades available in our turntable accessories & spares store here If the part you require isn't listed please let us know via our Contact Us page & we will do our best to find the part you require.

  • Can I plug a turntable into my Sonos System?

    A turntable can be connected to a Sonos Play:5, Five, Connect or Connect Amp provided it either has a built in Phono PreAmplifier or you have an external Phono Pre-Amplifier connected in line between the Turntable & the Sonos component. Please Contact us if you require additional help with this option.

  • What is the difference between moving magnet (MM) and moving coil (MC) turntable cartridges?

    In a Moving Magnet cartridge, the canteleiver (the arm) has 2 magnets attached inside the stylus body, 1 for the left channel & 1 for the right channel. These move according to the groove of the record & induce an electrical signal into the coils inside the cartridge body. This signal is then amplified by a phono pre-amp, either built into you amplifier or an external unit, to reach audible levels. In a Moving Magnet cartridge it is possible to replace the stylus once the original has worn. Most manufacturers will make a selection of styli of differing grades to fit the same cartridge. A Moving Coil cartridge is manufactured in opposite arrangement to Moving Magnet. The coils are attached to the canteleiver while the magnets are fitted inside the cartridge. It is generally accepted that Moving Coil cartridges are superior in sound quality to Moving Magnet cartridges, the compromise is that Moving Coil cartridges are significantly more expensive than Moving Magnet cartridges, & also that it is not possible to replace the stylus once worn, necessitating the purchase of a complete new cartridge.

  • Can the stylus be replaced on all cartridges?

    No. Styli can usually be replaced on Moving Magnet (MM) type cartridges but it is not possible to change the stylus on Moving Coil (MC) Cartridges

  • Can I fit an alternative cartridge if my stylus is no longer available?

    In most cases your turntable will have a 1/2" headshell mount, this can be identified by two small bolts running through your headshell to the cartridge. This is by far the most common type of connection with most new cartridges conforming to this standard. Other not so common but replaceable connections are a bayonet fitting, where the cartridge plugs directly into your tonearm via a bayonet, & a P4 connection, where your cartidge plugs directly into your tonearm by four pins. Fittings that are not replaceable include slide connectors such as those used by Dual & single screw connections, as used on very old turntables.

To Top