Arcam AVR10 & PA410 Combi Pack

Stunning Realism, Immersive Sound

The AVR10 is a high-performance audio/visual receiver that delivers stunning realism for the ultimate home cinema experience. With an impressive 12-channel surround solution and featuring all the latest CODECs from Dolby, DTS, Auro-3D and IMAX Enhanced, the AVR10 exemplifies sound quality and engineering excellence.

The AVR10 features the efficient class AB amplification for a level of transparency that delivers the most captivating sound. Audiophile listening experiences are optimised with full 12-channel Dirac

calibration on board as well as simple streaming with a mobile device using the native app of choice via Apple AirPlay2 or Google Chromecast.

Features

Dolby Atmos , IMAX Enhanced, Auro-3D & DTS:X 7.1.4 decoding
4K (UHD) HDMI2.0b with HDCP2.2
7 HDMI inputs, 2 HDMI outputs, eARC compatible
Dirac Live® room correction
ESS 9026PRO audiophile DAC
Class AB power amplification -
Uses frame-type transformer
Wifi / Ethernet, RS232 and IR control
Google Cast/UPnP capability for streaming audio
Tidal Connect, Spotify Connect, and AmazonMusicHD via the latest software update
Wifi / Ethernet & Bluetooth
Free MusicLife iOS and Android UPnP and control app
7 channels of integrated class A/B amplification designed to drive low impedance loads
Automation via IP, RS-232, 12V trigger and IR
2 channels: 85 WPC at 8Ω
7 channels: 60 WPC at 8Ω
Add 4 channels of amplification for full 7.1.4
Same features and specifications as AVR30, except class A/B power. Uses frame-type transformer
Google Cast/UPnP capability for streaming audio
Weight: 36.3 lbs (16.5kg)
Dimensions W x D (including speaker terminals) x H (including feet): 433 x 425 x 171mm
Packaged weight: 43.6 lbs (19.8kg)

Arcam PA410 Power Amplifier

Exceptional Power, Immersive Sound

The PA410 is a high-performance power amplifier that delivers 4 channels of efficient Class AB amplification. With an impressive 70W per channel, the PA410 is designed to offer the greatest flexibility and power without compromising on control.

Featuring the best-in-class components including a toroidal based power supply, acoustically damped chassis, paralleled transistor output stages and exceptionally low levels of distortion, the PA410 masters the reproduction of music with all its originality and detail for an unmatched level of sound quality and clarity.

Features:

4 Channel Power Amplifier
4 x 50W Class AB amplification (8ohm, 20Hz-20kHz, 0.2% THD)
Toroidal transformer
RS232 control
Continuous power output at 0.2% THD per channel
- 4 channels driven, 4Ω / 8Ω, 20Hz – 20kHz - 70W / 50W
- 2 channels driven, 4Ω / 8Ω, 20Hz – 20kHz - 90W / 60W
- Harmonic distortion, 80% power, 8Ω at 1kHz - 0.003%

Inputs
Input sensitivity 50W / 8Ω - 600mV RMS
Signal/Noise ratio (A-wtd) 50W / 8Ω - 105dB
Input impedance - 10kΩ
Frequency response - 20 - 20kHz +/-0.05dB
General
Mains voltage - 110–120V or 220–240V, 50–60Hz
Power consumption (maximum) - 700W
Power consumption (idle, typical) - 90W (Thermal dissipation approx. 340 BTU/hour)
Power consumption (standby) - <0.5W
Dimensions W x H x D (including feet, control knob and speaker terminals) - 433x325x105mm
Weight (net) - 10kg
Weight (packed) - 11.5kg
EAN - 6925281969195