Velodyne SC600D Subwoofer Amplifier 200W RMS D

Ex-Demonstration

Velodyne C-600D Subwoofer Power Amplifier

The SC-600D is a matching amplifier to the SC-600 IW and SC-600 IF/IC subwoofers. The amplifier is digitally tuned for dynamic bass and includes distortion limiting electronics. Twin subwoofers can be installed using a rear-panel pass through on one amp to a second SC-600D. (If you want to use one amp to drive two subwoofers, use the SC-602.)

The amplifier comes with a remote control with a one-button, 5-band, Auto-EQ room bass optimization feature, four listening presets, night mode, volume controls, phase control and mute mode. The 2 unit high amplifier is easily rack-mounted and uses conventional speaker wires.

The amplifier front panel has duplicate controls as well as a mic jack for the Auto-EQ function, low pass crossover frequency control, 12-volt trigger, IR repeater jack and an RS-232 control input that is Crestron certified. The crossover can be set from 30 Hz to 160 Hz. The phase can be set to 0, 90, 180 or 270 degrees.

 

·         Accessories        Mic, Mic Stand, Remote Control

·         Amplifier             400W Dynamic, 200W RMS Power

·         Auto On/Off      No

·         Cabinet Design  N/A

·         Color     Black

·         Dimensions: (H/W/D)    3.6" x 17" x 13" (9 x 43.2 x 33 cm)

*Allow two extra inches in depth for wire connectors and power cable.

*Includes feet. Feet can be removed for rack mount use. Unit is approximately "two rack units" high.

·         HiPass Crossover              80 Hz (6 dB/octave)

·         LoPass Crossover             30-160 Hz, Defeatable, 24 dB/octave slope

·         Phase Control    0, 90, 180, 270 Degrees

·         Removable Grille             No

·         Shipping Weight               17 lbs. (7.7 kg)

·         Voice Coil            N/A